Please ensure that you match the camera's voltage to the panel port, then match the cable to the camera's jack.
1. (optional)Recharge the panel through IN/OUT USB 5V. Use the included USB-C cable and a compatible 5V/2A USB power adapter. This port also supplies 5V at up to 2A to a compatible USB-C device.
2. Choose the round output by its label. OUT DC 6V supplies up to 1.5A. OUT DC 12V supplies up to 1A. Check the camera's required voltage and current before connecting.
3. Choose the camera-end plug. The two included cables have the same panel-end plug. Match the camera's jack to the 4.0 × 1.7 mm or 5.5 × 2.1 mm plug, and verify that the polarity matches.
Unsure which connection fits your camera? Send its model and a photo of the power label to support@parallens.com.
For the solar panel in your Bird Cam feeder roof, see the troubleshooting steps for the Parallens Bird Cam.
Comments
0 comments
Article is closed for comments.