Please mount the panel where it gets direct sunlight, then connect it to a compatible camera. Here are some steps to set up the Parallens Solar Panel.
1. Mount the panel. Use the strap to secure the bracket to a tree. Attach the panel and aim it toward direct sunlight. Leave slack in the cable and keep connections dry.
2. Pick the port and cable. Check the camera's voltage, current, plug size and polarity. For round DC, choose OUT DC 6V or OUT DC 12V by label. Both DC leads share the same panel-end plug. Match the other end to the camera. For compatible 5V USB-C cameras, use the included USB-C cable.
3. Connect and test. With the camera off, connect the cable to the matching ports. Turn the camera on and make sure it works.
If the panel's battery is low, use the included USB-C cable and a compatible 5V/2A wall adapter to recharge it indoors through IN/OUT USB 5V. The adapter is not included.
Keep the panel clear of leaves and dirt. Its built-in battery can power a compatible camera after sunset while it has charge.
For plug sizes, power ratings and camera compatibility, search for port and cable in the help center.
Comments
0 comments
Article is closed for comments.